Setup guide

6–8 RibbonMinder
Setting Ribbon Size
Follow this procedure when first setting up RibbonMinder parameters or if
you are changing the ribbon to a different length of ribbon.
Changing the ribbon size always resets the new Ribbon Life value to 100%.
Step
Press Result Notes
1.
ON LINE
Off–Line xxx%
Ready 1
The printer must be off-line to
change the configuration.
2. Raise the printer cover.
3.
+
ENTER Switch
Not Locked
Press both keys at the same time.
Unlocking permits configuration
changes.
4.
Ribbon Life xxx%
5.
Ribbon Life xxx%
New Ribbon
6.
UNTIL
Ribbon Life xxx%
Set Ribbon Size
7.
Currently xxx
New Size xxx*
8.
UNTIL
Currently xxx
New Size (Desired value)
Press " or A until you reach
the appropriate ribbon size
(standard ribbon is 60 yards
long).