Setup guide

5–15
Routine Service and Diagnostics
Step NotesResultPress
10. To start the hex dump:
Send the data from the host computer to the printer. The data will print in hex dump format. (Any
data remaining in the printer’s internal input buffer will print before the hex code printout starts.)
Figure 5–4 shows a few lines of a hex dump printout as a sample.
11. T o stop the
hex dump,
press:
ON LINE
Off–Line
Hex Dump
Printing stops.
12.
CLEAR
Off–Line
Ready 1
13.
+
ENTER Switch
Locked
Locking prevents settings
from being changed.
14. Close the printer cover.
15.
ON LINE
On–Line
(Current Font) 1
Places the printer on-line,
ready for normal operation.