Setup guide

5–6
Routine Service and Diagnostics
Diagnostic Tests
With the exception of testing the interface between the printer and the host
computer (and the associated data cable), you do not need to send data from
the host computer to the printer to test printer operation. You can use the
printer built-in diagnostic tests to check many of the functions of your printer,
including print quality and overall operation.
Print Datastream
in Hex. Code
Diagnostics
(From page 3–25)
Press ENTER
to print the
configuration
Off–Line Hex Dump
On–Line Hex Dump
Power–on Time 30000.0 Hours
Print Time 30000.0 Hours
Shuttle Strokes 2147483648
Print Lines 2147483648
Print Pages 2147483648
(statistical sample)
Configuration
Printout
Printer Test
Full Width
Printer Test
8 Inch Width
Print
Statistics
Press ENTER to start a test:
Shift Recycle
All E’s
E Plus TOF
All H’s
Underline Only
Black Plot
Shut/Ribbon Fast
Shuttle
Paperout Adjust
Demo
Phase Adjustment
Press ENTER to start a test:
Shift Recycle
All E’s
E Plus TOF
All H’s
Underline Only
Black Plot
Shut/Ribbon Slow
Shuttle
Paperout Adjust
Demo
Phase Adjustment
To view options, press:
DOWN
UP
RIGHT
LEFT
To select an option, press ENTER
To exit configuration (returning to
* = Factory Default
Off–Line Ready), press CLEAR
B
Y
"
A
Figure 5–3. Diagnostics Menu