Setup guide

Configuring the Printer3–66
Save Parameters Menu Options
You can save up to four configurations to meet different print job
requirements. A configuration consists of several parameters. They will be
saved into the currently loaded configuration (1, 2, 3, or 4). (Also see
“Saving Your New Configuration” on page 3–17.)
The parameters are stored in non-volatile memory (NVRAM), so they are not
lost if you turn off the printer. NVRAM is divided into four blocks, each of
which stores a different configuration.
Parameters 1
(From page 3–25)
Save
Press ENTER
to save the
parameters
To view options, press:
DOWN
UP
RIGHT
LEFT
To select an option, press ENTER
To exit configuration (returning to
* = Factory Default
Off–Line Ready), press CLEAR
B
Y
"
A
Figure 3–15. Save Parameters Menu