Manual

OKI Menu
119
Currency Sign
• RMB Select. The ASCII code hex 24 is printed as a RMB “¥” character in
DBCS mode. Default for GB.
• $ Select. The ASCII code hex 24 is printed as a dollar “$” character in
DBCS mode.
NOTE: Available for H-Series GB firmware with LQ1600K selected only.
AR3240
• Disable. AR3240 emulation does not take effect. Default.
• Enable. AR3240 takes effect, SUB (0x1A) is used as another SFCC. The
listed commands will take effect and turn the extending table character
on.
NOTE: Available for H-Series GB firmware with LQ1600K selected only.