User's Manual


32
Setting WiFi by Configuration Utility
Connect the printer and computer with a USB cable.
Note: The printer connects with the computer via USB to USB cable or USB to RS-232 cable
(option).
Turn the printer power on using the Power key
Open Configuration Utility and set interface (default setting is USB)
USB to USB cable USB to RS-232 cable
The default interface setting is USB
interface. If USB interface is connected
with printer, no other
settings need to
be changed in the
interface field.
Select “Wireless” tab and click on “Built-in wireless module” item.
Enter the new WLAN settings in the editor.
Enter WLAN SSID matching with the AP.
Select WLAN Encryption matching with the AP.
Enter WLAN Key if WEP or WPA Personal
Press “Set” button to set the new settings to the printer.
The Wi-Fi icon will be shown in the LCD panel if the device has been connected.
Ping the device to confirm the connectivity.
Print out the self-test page to confirm if it’s connected with the correct settings.
Remove the cable to print data for testing
To clear all the wireless setting, press Wireless Factory Default button.
NOTE: WLAN Encryption does not represent the encryption used in the current connection.
WLAN Encryption selection is used for setting up the WLAN WEP/WPA/WPA2 Parameters. The
actual encryption is determined by the AP that the printer is associated with.