User`s manual

Chapter 3 Host Interface Menu
92
Ethernet Parameters (If Installed)
The ETHERNET PARAMS menu enables you to set up your printer
so it can communicate on a network.
For information on assigning the IP Address, Gateway Address,
Subnet Mask and MAC Address, refer to the
PrintNet User’s
Manual
.
You may also enable or disable the Novell or NetBIOS Protocols
within this menu, as well as selecting which Novell Frame scheme
is used in processing Novell signals. See the Novell chapter in the
PrintNet User’s Manual for more details.
If the printer is connected to a Printer Manager utility, the PPM Port
number and PPM Port Timeout settings must match the settings in
the Printer Manager program. See the appropriate Printer Manager
manual for details.
Ethernet
Parameters
Auto Sensing*
Ethernet II
Ethernet 802.2
Ethernet 802.3
802.2 Snap
3001*
(1023-65535)
10 secs. *
(1-255)
Enable*
Disable
Enable*
Disable
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
hh.hh.hh.hh.hh.hh
IP Address Gateway
Address
Subnet Mask MAC
Address
Novell
Protocol
Novell
Frame
PPM Port
Number
PPM Port
Timeout
NetBIOS
Protocol