User`s manual

Dataproducts Parameters
79
Dataproducts Parameters
Data Bit 8
• Enable. Allows access to the extended ASCII character set.
• Disable. The printer interprets bit 8 of each incoming data
character as a zero, regardless of its actual setting.
PI Ignored
The PI (Paper Instruction) signal is used to control vertical paper
motion.
• Enable. Ignores the PI signal and treats the data as characters
or control codes
• Disable. Causes the printer to interpret the eight data lines as
VFU commands when the PI signal is true.
IEEE 1284Serial
Host Interface
Data Bit 8
Enable*
Disable
Ethernet
1
Centronics Dataproducts
PI Ignored Data Polarity
Resp.
Polarity
Latch On
Data
Prime Signal Buffer Size
In K
TOF Action
Standard*
Inverted
Disable*
Enable
Middle*
Trailing
Leading
Standard*
Inverted
Enable*
Disable
Reset*
Do Nothing
1*
2
4
8
Auto
Switching
*= Factory Default
1
= If installed
16
32
64*
128