User`s manual

Error Messages
235
3. For error numbers 01, 14, and 15: If the error occurs while
paper is not moving, it is
not necessary to reload or reprint.
4. For error number 02: If the error is caused by a paper-empty at
the lower sensor (Paper Near End Sensor), it is not necessary
to reprint.
5. Status message only. No operator action required to clear
message
The Front Cover Open error can occur when either the Upper
Doors or the Paper Output Door (as seen on the previous page) is
open. If the Upper Doors are closed, push the Paper Output Door in
to release it to its down position.