User`s manual

Chapter 5 General Cleaning
176
CAUTION The transfer charger must be in the down position to avoid
scratching the drum. Failure to perform steps 9 and 10 will
damage the drum.
9. Rotate the transfer elevator drive shaft counterclockwise.
Watch the charger movement:
a. If the charger starts to move up, it is already in the down
position.
b. If the charger starts to move down, continue to rotate the
drive shaft until the charger reaches the complete down
position.
Legend:
1) Transfer Charger
2) Transfer Elevator Drive Shaft
10. Lower the transport surface by turning the green lever on the
transport unit to the left.
11. Pull the transport unit toward you until it stops.
12. Using a vacuum, clean the toner, paper dust, etc. Be sure to
clean under the transport unit as well.
1
2