User`s manual

Flash Messages
123
49. Remove the diskette(s) from the computer and store them with
the printer.
50. If you had to install a parallel data cable to the computer and
printer in step 8, continue with step 51. If not, skip to step 56.
51. Unplug the printer AC power plug from its electrical outlet.
52. Power off the computer.
53. Disconnect the parallel data cable from the computer and from
the printer.
54.
Reconnect the customer’s data input cable(s) to the printer, if
required.
55. Plug the printer AC power plug into its electrical outlet.
56. Set the printer power switch to | (on). If the printer is on line,
press the ONLINE key to place the printer offline. Press the
= +
> keys simultaneously to unlock the ENTER key.
57. Using the configuration printout you made in step 3, restore the
printer configuration(s).
58.
Press the
= + > keys
simultaneously to lock the ENTER key.
59.
Press the ONLINE key to place the printer on line.
Flash Messages
Table 2. Flash Messages
LCD Messages Explanation Required Action
CLEARING PROGRAM
FROM FLASH
The program successfully
loaded into printer RAM and the
checksum matched. The printer
is now deleting the old program
from the flash file system.
None.
DIAGNOSTICS
PASSED
The printer self-test has
finished, and there were no
errors.
None.