Manual

Config. Control Menu
55
Delete Configuration
Delete configuration allows you to delete a configuration file. You
can delete one or all of your eight customized configurations.
Configuration 0 is a factory-preset configuration and cannot be
changed or deleted.
Power-up Configuration
Power-up configuration allows you to specify one of nine (0-8)
configurations to be used upon printer power-up. The factory
default for power-up is configuration 0.
Protect Configs
The Protect Configs (protect saved configuration) option allows you
to specify whether or not a new configuration should “overwrite” an
existing configuration when you activate the “Save Config” option:
• When disabled (default), the new configuration overwrites the
existing configuration. There is no protection set for the former
configuration.
• When enabled, the new configuration does not overwrite the
existing configuration, and the following is displayed:
• Therefore, you must delete an existing configuration before
trying to save a new configuration, as it is protected.
Name Configs
You may specify a 15 character name which can be used to identify
a configuration. The name you enter for a configuration will be used
in the Load Config., Save Config., Delete Config., and Power-Up
Config. menus. The names can only be cleared by using the Reset
Cfg Names Menu.
CONFIG. EXISTS
DELETE FIRST