Manual

Chapter 2 Powering On The Printer

2. Turn on the printer by setting the power switch to | (On). When

you power on the printer, the following occurs:

a. The printer reads the emulation boot file and briefly

displays the message:

TESTING HARDWARE

PLEASE WAIT...

b. DIAGNOSTICS PASSED

c. STAND BY light flashes

d. The ONLINE indicator lights continuously and STAND BY

goes out.

NOTE: The printer can be set to power on in the OFFLINE state

instead of the ONLINE state. To print, ONLINE must be lit;

if it is not, press ONLINE.

If other messages and prompts appear on the control panel,

answer the prompts and follow the directions as explained on

page 182.