User`s manual

Chapter 2 Configuration Tools
36
LEAP Parameters
LEAP is only available when using Cisco Aironet 350 radio card.
The Cisco LEAP allows for a WEP key timeout that forces
re-authentication, resulting in the derivation of a new WEP key for
the session.
• Auth Method. This feature allows the user to select the
authentication method used for the wireless network interface.
• Open (the default). Selects open authentication.
• Shared. Selects shared key authentication.
• Kerberos. Selects Kerberos authentication (for use when a
Symbol RF card is installed).
• LEAP. Selects LEAP authentication (for use with a Cisco
RF card installed).
• LEAP Username
• LEAP Username (01-15). The first 15 characters of the
LEAP user name (maximum number of characters is 32).
• LEAP Username (16-30). Characters 16 to 30 of the LEAP
user name (maximum number of characters is 32).
• LEAP User (31-32). Characters 31 to 32 of the LEAP user
name (maximum number of characters is 32).
• Reset LEAP User. Resets the LEAP user name to an empty
string.
• LEAP Password
• LEAP Password (01-15). The first 15 characters of the
LEAP password (maximum number of characters is 32).
• LEAP Password (16-30). Characters 16 to 30 of the LEAP
password (maximum number of characters is 32).
• LEAP Password (31-32). Characters 31 to 32 of the LEAP
password (maximum number of characters is 32).
• Reset LEAP Pswd. Resets the LEAP password to an empty
string.