User`s manual

Chapter 13 Complete Command List
296
list pping
List all the current periodic ping setting.
list pserver
List the current general print server settings (e.g., print server
name and Novell mode). Novell parameters are listed on
ADAPTER and WIRELESS NICs only.
list prn
List the current parallel port setting (e.g., mode).
list rprinter
List any current RPRINTER definitions.
list snmp
List the Trap Table containing SNMP Managers.
list sysinfo
List the current NIC system information (e.g., contact name and
protocol stacks enabled).
list tcpip
List all current TCP/IP network settings (e.g., IP address and
subnet mask).
list test
List the status of output tests on the I/O ports.
list tn
List all current tn protocol settings.
list uptime
Lists how long the NIC has been up and running from the last
reset.
list user
List the current user definitions (e.g., user names and types).
list var
List all pre-defined variables including any newly created ones.
Any of these defined variables can be referenced in a string by
placing a “$” before the variable name (e.g.,
set model m1
trailer $FF
).