User`s manual

Chapter 1 Interfaces
20
Table 5 shows the NET LED states for various network conditions
when no WLAN card is found or present.
DIP Switches
On the back of the printer, you will find a small window where you
can access two DIP switches labeled 1 and 2 (see
Figure 2 on
page 17). The functions of the DIP switches are explained in
Table 6.
NOTE: The DIP switches are not marked with “on” or “off” labels.
Instead, the status of the switch is indicated by its position,
up or down. If the interface card has been installed upside
down (i.e., the DIP switches are to the left of the cable
connector), your DIP switch positions will be reversed and
the settings inverted.
Table 5. Wireless NIC NET LED States (No WLAN)
Wired Ethernet Network Condition
(No WLAN)
NET LED
Network-link is present Green
Network-link is not present Off
Network-link present and transmitting Blink