User`s manual

10/100Base-T
19
Wireless Network Indicator
The wireless NIC has 2 bi-color LEDs which can produce three
colors each: green, red, and yellow (green and red combined).
Table 3 shows the STAT LED states for various sytem conditions:
Table 4 shows the NET LED states for various network conditions
when a WLAN card is inserted into the wireless NIC. The NIC
(wired) interface will not affect the NET LED while a WLAN card is
present.
Table 3. Wireless NIC STAT LED States
System Condition STAT LED
System is running without an IP
address.
Green, 2 Hz flash
System is running with an IP address. Green, 1 Hz flash
System error. Red 2Hz flash
System is in upgrade mode with an IP
address.
Yellow, 1 Hz flash
System is in upgrade mode without an
IP address.
Yellow, 2 Hz flash
Table 4. Wireless NIC NET LED States
WLAN Network Condition NET LED
Network-link quality is good Green
Network-link quality is fair Yellow
Network-link quality is bad Red
Network-link not present Off
Network-link present and transmitting Link quality + blink