User`s manual

10/100Base-T
17
Interfaces
The NIC interfaces with the host system through an Ethernet
10/100Base-T interface connector.
There are dip switches and LEDs on the NIC.
10/100Base-T
The NIC at the rear of the printer for the 10/100Base-T interface
has two indicator lights and two DIP switches, as shown in
Figure 2.
NOTE: The Wireless NIC DIP switch functionality is the same as
the 10/100Base-T NIC.
Figure 2. Status Indicator Lights and DIP Switches
1
2
STAT (System Status)
NET (Data to Network)
DIP Switches