User`s manual

Configuration Checklist
205
7. Create or verify the existence of an AS/400 TCP/IP interface for
NIC. See
“Configuring An AS/400 TCP/IP Interface With
ADDTCPIFC” on page 206.
8. The next step depends on your AS/400 release. Configure your
printer with one of these procedures:
• “Configuring PSF/400 For IPDS On V3R2” on page 208.
• “Configuring PSF/400 For IPDS On V3R7 And Above” on
page 214.
9. Notice that when the IPDS feature is installed, the queue name
‘d4prn’ is not available.
10. Verify the printer is ON using the VFYCFG command.
11. Verify that TCP/IP has been started using the STRTCP
command.
12. Test your configuration. See “Verifying The IPDS Configuration
On AS/400” on page 226.
13. To share the printer on the network, verify that the necessary
parameters have been set correctly. See
“Sharing The AS/400
Printer On The Network” on page 227.
14. If you have problems, refer to “AS/400 Troubleshooting” on
page 231.