User`s manual

Setting Up Printing For ASCII Files
197
b. PGL or VGL or PPI program.
Manufacturer Type Model = *WSCSTCONT
Workstation Customizing Object = QWPDEFAULT
Library = QSYS
This selects a generic object that passes the data
unchanged without any escape codes to the printer. Text
files will print in the currently selected printer configuration,
cpi, lpi, and form length. OS/400 versions below V3R7 may
not have this selection and may require manual creation of
a generic WSCST. Please contact Printronix Technical
Support for assistance.
NOTE: For occasional text reports, create a printer configuration
for each report and use the [Job Select] key to select a
report configuration.
Internet Address (INTNETADR)
The IP address of the NIC.
NOTE: You may specify either *INTNETADR (and the NIC IP
address) or the hostname for the NIC (if you added the
printer to the host table entry as directed in
“Configuring A
TCP/IP Host Table Entry” on page 193).
To Create An Automatic Remote Output Queue
1. From the AS/400 command line, enter CRTOUTQ .
2. Figure 29 displays in bold the parameters you need to specify.
Send TCP/IP Spooled File (LPR)
Type choices, press Enter.
Output queue OUTQ > USERNAME
Library *CURLIB
Maximum spooled file size: MAXPAGES