User`s manual

NDPS Configuration (Netware 4.11 And Above)
161
Setup Using LPR Mode
In this mode, an NDPS printer agent receives jobs from an NDPS
client, then forwards these jobs to a printer using the LPR protocol.
1. The printer must first be set up with IP connectivity and be able
to receive jobs using the LPR protocol.
2. Use Novelle Printer Gateway when setting up the NDPS printer
agent.
3. Select ((NONE)) for Novell PDS.
4. Select Remote (LPR on IP) for Port Handler, then enter the
hostname/ipaddress and printer name
(d1prn – d8prn by default) in the next dialog.
NOTE: When the IPDS feature is installed, queue name d4prn is
not available.
5. Select no driver in the Select Printer Drivers dialog, unless you
have a driver installed into the Broker's RMS which is to be
used with the printer.
Setup Using RPRINTER Mode
In this mode, an NDPS printer agent receives jobs from an NDPS
client, then forwards these jobs to a printer using the RPRINTER
IPX protocol.
1. The printer must first be set up to function in RPRINTER mode,
selecting any desired Print Server Name and Printer Number.
2. Use Novell Printer Gateway when setting up the NDPS printer
agent.
3. Select ((NONE)) for Novell PDS.
4. Select Remote (rprinter on IPX) for Port Handler.
5. Enter the Print Server Name and Printer Number from step 1
for the SAP Name.