User`s manual

NDS PSERVER Setup (Netware 4.x/5.x)
155
16. Click on a branch in the tree (i.e., context) that you would like to
create the NIC print server object in.
NOTE: If the context you choose is different than the one the file
server object for the file server you are using is in, you must
set the context on the NIC. See
“Setting The NIC NDS
Context (NDS Setups)” on page 141.
17. Click the right mouse button to bring up a submenu and choose
Create... from this menu. The New Object dialog displays.
18. In the Class of new object list, select Print Server and click
OK.
19. Type the name for the print server in the Print Server name
field. By default, the name is “M_xxxxxx”
where “xxxxxx”
equals the last six digits of the print server’s Ethernet address
(e.g., “M_091C1A”).
NOTE: The name you use here must match the name stored on
the NIC. This name can be found by using the
list
pserver
command. See “List Commands” on page 293 for
more information.
20. Select Define additional properties and click Create.
21. Click Assignments in the dialog that opens and then click
Add....
22. Select the printer you created earlier.
23. Click OK to assign this printer to this print server.
24. Click OK to close the Printer Servers Details dialog and make
the changes permanent.
25. Physically repower the printer to make the new settings take
effect.