User`s manual

NetWare Version 3.x RPRINTER Setup
147
5. Enter PCONSOLE.
6. Select Print Queue Information from the PCONSOLE Main
Menu.
7. Click Insert to add a new queue to the list of currently defined
queues.
8. Type in the name of this new queue when prompted, and press
ENTER. This can be any name you would like.
9. Click Escape to return to the Main Menu.
10. Select Print Server Information and press ENTER.
11. Click Insert when the list of existing print servers displays.
12. Select the print server that you want the NIC to service as an
RPRINTER. This is the PSERVER.NLM loaded in step 4.
13. Select Print Server Configuration from the menu that
displays.
14. Select Printer Configuration from the next menu to display a
list of configured printers.
15. Select an item from the list (e.g., an existing printer name or
“Not Installed”) to display the printer configuration window.
16. Assign a name (if not an existing printer) to this printer.
17. Select Remote Other/Unknown at the Type field.
18. Click Escape to save the changes.
19. Click Escape until you are back at the Print Server
Configuration menu.
20. Select Queues Serviced by Printer to display a list of defined
printers.
21. Select the printer you just defined and press ENTER.
22. At the list of queues that displays, click Insert to add a queue to
the list.
23. Select the queue defined and press ENTER.
24. When prompted for a priority, press ENTER to select the
default or select a priority.