User`s manual

NetWare Version 3.x PSERVER Setup
145
16. Select Defined Elsewhere from this list.
17. When done, press Escape and select Yes to save the changes
to this new printer.
18. Press Escape again to return to the Print Server Configuration
menu.
19. Select Queues Serviced by Printer.
20. Select this new printer from the printer list that displays and
press ENTER.
21. Click Insert at the empty queue list that displays.
22. Select the queue created in step 5 and press ENTER.
23. When prompted for the priority, press ENTER to select the
default or select a priority.
24. Press ESCAPE until you are back at the PCONSOLE Main
Menu.
25. Repower the printer.
26. Wait two minutes and then select Print Queue Information
from the PCONSOLE Main Menu.
27. Select this new queue from the menu that displays.
28. Select Currently Attached Servers to see which print server is
servicing this queue.
At this point, the NIC name (e.g., M_091C1A) should show within
this window. This means the NIC knows about this new Novell print
queue it must service as a PSERVER. Therefore, it will poll this
queue regularly looking for jobs to print.
NOTE: The NIC can service up to four printers on one file server. It
cannot service multiple file servers at one time.