User`s manual

Chapter 6 Novell Host Configuration
144
NetWare Version 3.x PSERVER Setup
To configure a print queue on a NetWare 3.x network:
1. Log on to the Novell file server as supervisor.
2. Enter PCONSOLE.
3. Select “Print Queue Information” from the PCONSOLE Main
Menu.
4. Click INSERT to add a new queue to the list of currently
defined queues showing.
5. Type in the name of this new queue when prompted and press
ENTER. This can be any name you would like.
6. Press ESCAPE to return to the Main Menu.
7. Select “Print Server Information” and press ENTER.
8. Click INSERT when the list of existing print servers displays.
9. Type the name of the NIC when prompted for a print server
name, and press ENTER when done. The default is M_xxxxxx
or M302_xxxxx for the Wireless Adapter, where xxxxxx
represents the last six digits of the NIC address found on the
configuration printout or control panel settings under Ethernet
Parameters, MAC address (e.g., M_091C1A or M302_00008).
10. Back at the print server list, select this newly defined NIC and
press ENTER.
11. Select Print Server Configuration from the menu that
displays.
12. Select Printer Configuration from the next menu to display a
list of configured printers.
13. Select Not Installed as the first item and press ENTER.
14. At the printer configuration window, type in the name for this
new printer. The name must be one of the predefined
destinations/queues on the NIC, normally d1prn.
15. Go to the Type field and press ENTER to see the possible
choices.