User`s manual

Changing The NIC Name (NDS And Bindery Setups)
137
7. Change the Sampling Interval to the desired number (in
seconds).
NOTE: You may also want to change the “Service mode for forms”
to “Change forms as needed.” If you do not do this, the NIC
will need to poll the file server twice as much to get all the
information it needs.
8. Press ESCAPE and select Yes to save the changes to this new
printer.
9. Repower the NIC by turning the printer off and on to make the
changes take effect.
Changing The NIC Name
(NDS And Bindery Setups)
When defining a new print queue on a Novell file server, you must
define a new print server to represent the NIC. This name must
match the predefined name given to the print server. Make sure
that the print server object you are using for your PSERVER setup
has the same name as that stored on the NIC. If you need to
rename the print server object in Netware Administrator, delete the
object and re-create it with the new name. Netware Administrator
seems to have some problems with renaming objects.
NOTE: Changing the name will affect all of the protocols that are
running on the NIC.