User's Manual

Chapter 2 Printing Adjustments
36
Positioning The Media Sensors
Your printer is equipped with upper and lower media sensors that
detect the top-of-form position on media with label length indicators
(gaps, notches, holes, or black marks). The media sensors also
detect Paper Out conditions.
Use the handles on the lower media sensor to horizontally position
it so that the left edge of the sensor is aligned under the left edge of
the adhesive label of the installed media. Slide the upper media
sensor, located in the slot under the printhead cover (see figure on
page 35), directly over the lower sensor.
Lower
Media Sensor
Handle (2)
Lower
Media Sensor
(left edge)
Adhesive Label
(left edge)