User's Manual
Table Of Contents
- Table of Contents
- 1 RFID Smart Label Application And Reference Notes
- 2 Printer Setup
- 3 Smart Label Development
- Index
Loading Roll Media
27
Loading Roll Media
IMPORTANT
If you are using direct thermal mode, clean the printhead,
platen roller, and upper and lower media sensors every time
you change the media. See “Cleaning” on page 51.
1. Slide the media hanger guide outward to the end of the media
hanger, and flip it up into the horizontal position (as shown).
2. Open the pivoting deck by rotating the deck lock lever fully
clockwise.
Media Hanger
Media Hanger
Guide
Deck Lock
Lever
Pivoting
Deck