User's Manual

Saving The Configuration
50
Saving The Configuration
After customizing your settings, save them as a configuration:
1. Press the key to enter the QUICK SETUP menu.
2. Press ↑ or ↓
until Save Config. / 1* displays.
3. If necessary, press + or – until the desired configuration
displays.
4. Press
↵. Saving Configuration displays briefly.
NOTE: You can specify a 15-character name for your configuration.
See “Name Config (1-8)” in the
User’s Manual .
5. If necessary, set your newly saved configuration as the
Power-Up configuration. See “Selecting The Power-Up
Configuration” below.
Selecting The Power-Up Configuration
To have a saved configuration automatically loaded when you
power up the printer, set the saved configuration as the Power-Up
configuration:
1. Press the key to enter the QUICK SETUP menu.
2. Press ↑ or ↓
until Power-Up Config. / Factory* displays.
3. Press + or –
until the desired configuration displays.
4. Press
↵. An asterisk (*) displays next to the selected
configuration.
Loading A Saved Configuration
To use a different configuration, load a saved configuration:
1. Press the PAUSE key until OFFLINE displays.
2. Press the JOB SELECT key until the desired configuration
displays.
3. Press
↵. Loading Saved / Configuration displays.
.
.
.
.
.
.