Instruction manual

Advanced Control Panel Features
Function
Possible Values Description
Ribbon Check: On* or Off Sets whether or not ribbon
checking is active. Turning this
off may limit the warranty on the
print head. For more information,
see the chapter on “Using Special
Features” and refer to the warranty
information in the “Printer
Specifications” appendix.
Ribbon Life: 15*, 5 - 30 Sets the number of characters to be
printed before the “Change
Ribbon” message is displayed.
For more information, see the
chapter on “Using Special
Features”.
Paper Cutter: Yes or No* Sets whether or not the optional
FormsCutter is installed.
Imager: Yes or No* Sets whether the Imager or Imager
Plus is installed.
Translation: Off* or On This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Free Format: Off* or On This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Terminator: LF* or CR This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Ignore Char: Off* or On This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Zero: Normal or Slashed* This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Page A-2