Operator`s manual

PRINTER CONFIGURATION

TEST MENU

The TEST MENU is used to access some testing as well as some record

keeping items. To access the test menu, enter Setup and press the MENU

button until

TEST MENU is displayed as shown below.

TEST MENU

Next press either of the ITEM buttons to access the test modes available.

Print the Menus

Possible Values: No*, Menu Tree, Current Values

This item may be used to print the entire menu tree or a list of current

values.

Menu Tree will print all possible items in the menu and the possible

values for each. This may be useful in case this manual is misplaced or the

printer is upgraded to a newer version of firmware.

Current Values will print only the items relevant to the current printer

configuration and their current values. This provides a means of record

keeping or “backup”, so that the values can be checked and restored in case

an operator inadvertently changes one.

After setting this value, press ONLINE to begin printing. After printing is

completed, the value of this item will automatically return to

No. Note that

once printing begins, taking the printer off line for any reason (ONLINE

button pressed, ribbon lid or paper door opened, or a paper fault) will cause

printing to be aborted.

Test Mode