Operator`s manual

PRINTER CONFIGURATION
57
This item selects whether the minimum I/O buffer size should be used.
Setting this item to
No will allow the printer to make maximum use of the
I/O buffer (see “Paper Out Fault” on page 79 for more information on
buffer size). Setting this to
Yes may decrease performance, but is useful
when using the printer with operating systems that try to keep track of
which page is currently being printed by the printer.
EtherLink LAN Interface Items
INTERFACE MENU
LAN
Emulation
Emulation
Epson
Possible Values: Epson*, Basic Bar Codes, IBM
Proprinter, DEC LA120, TTY,
Printek, ANSI X3.64
This item selects the emulation to be used whenever the LAN port is active
(see “Automatic Port Switching” earlier in this section). The emulation
should be set to match the type of printer your software supports.
Automatic Carriage Return
Auto CR
On
Possible Values: Off, On*
This item enables or disables automatic Carriage Returns (CR) whenever a
Line Feed (LF), Vertical Tab (VT), or Form Feed (FF) is received.
Automatic Line Feed
Auto LF
Off
Possible Values: Off*, On