Operator`s manual

DAILY OPERATION
24
line of the display. In the
FormsMaster 8003 the not loaded
message will alternate with the tractor
path assigned to that form. For more
information, see the following section on
“Selecting and Loading Forms”.
ALIGN PRINT This button will access the horizontal and
vertical print adjustment settings for the
currently selected form.
When ALIGN PRINT is pressed, the horizontal
adjustment is shown first. Pressing the VALUE
buttons will move the print position on the
line left or right by 0.01 inches for each press
of a button as indicated on the display. The
arrows to the side of the number will indicate
the direction the print will be moved.
To access the vertical adjustment, press either
ITEM button. Pressing the VALUE buttons will
now move the print up or down on the page by
0.01 inches for each press of a button as
indicated on the display. The arrow to the
right of the number will indicate the direction
the print will be moved.
For a more detailed description, see “Aligning
Print” later in this chapter.
SETUP This button is used to set up the various
operating parameters of the printer for forms,
interfaces, etc. This button is not used on a
daily basis. For more information see the
chapter on “Printer Configuration”.