Operator`s manual

SPECIFICATIONS
127
ENVIRONMENTAL SPECIFICATIONS
Power requirements: 120 VAC ±10%, 60Hz.
Power consumption: 60 W non-printing, 225 W printing.
Heat Output: 205 Btu/Hr. Idle, 768 Btu/Hr. Printing.
Audible noise: ≤55 dBA when used with a
Printek FormsMaster 8000 print stand..
Operating Temperature: 50°F to 95°F.
Relative Humidity: 20% to 80% non-condensing.
Physical Size: 11.8" High x 26.25" Wide x 20.5" Deep.
Weight: 63 lbs (74 lbs shipping).
OPTIONS
Coaxial/Twinaxial Interface
Coaxial IPDS Interface
Twinaxial IPDS Interface
EtherLink Interface
Imager or ImagerPlus Graphics Co-Processor
Paper Cutter
Setup Module
Print Stand
240 VAC ±10%, 50Hz. Power Supply
* May be emulation dependent.
Specifications subject to change without notice.