Operation Manual

6
TRIMMING BEARDS
1. Before you trim, comb your beard in the direction that it grows.
2. Determine how much beard you want to cut and select the accessory accordingly.
3. Press the ON / OFF switch to turn the beard trimmer ON. The indicator light will illuminate.
Begin trimming.
4. When you are finished trimming, turn the beard trimmer OFF.
TRIMMING MOUSTACHES AND SIDEBURNS
1. Slide miniature trimmer up.
2. Hold trimmer perpendicular to the hair.
3. Trim any stray hair.
CAUTION: The main cutter is still operating.
RECHARGEABLE BATTERY REMOVAL AND RECYCLING INSTRUCTIONS
PROCEDURE
1. Remove trimmer from charging base
2. Use a small head screwdriver to remove the screws from the cutting blades.
3. Use a small head screwdriver to remove the screws from the cutter assembly. Remove the cutter
assembly and the motor (you may have to cut the wire from the motor) Pull out the side trimmers.
4. Pull or gently pry the push button and spring.
5. Pull out the inner housing.
6. Cut the wire from the batteries. Pull out the batteries from the inner housing
CLEANING INSTRUCTIONS
• Remove trimmer from charging base. Make sure trimmer is OFF.
• Slide out the accessory from the trimmer.
• Remove the cutter using a small head screwdriver.
Starck_6004_IB_22-3-04 3/22/04 3:44 PM Page 6