Specifications

4 PROGRAMMING MANUAL 516307 C PUBLICATION DATE 31 JAN 2008.DOC
3. BASIC DESCRIPTION OF CONTROLS
 THE CONTROL OFFERS:
– 3 programs with default temperatures low, medium and high.
– Easy operation with piezo buttons.
– Dryer programs can be customised (time, temperature, cooldown)
– OPL version: Advancing the program by the „START“ button
– COIN version: free programmable program prices and coin values
– Diagnostic messages
 DURING DRY CYCLE THE FOLLOWING DATA IS SHOWN ON THE DISPLAY:
– Shows which Program is selected
– Time until the end of the cycle
– For coin machines, the coin value (inserted coin) for half a second
 THE HARDWARE AND SOFTWARE OF „THE EASY CONTROL“ DRYER
COMPUTER:
– The hardware contains 2 electronic boards :
• The Display board with seven segment displays and connection for keypad
• The Main board: Micro-Controller Board for EC-machine
– The software is implemented in an EPROM - Flash memory.
• The IC is fitted in an IC holder on the Main Board.
– Key switch for selecting RUN or PROGRAM mode
– Infrared Communication/Networking
 OPERATION MENU:
– Selection of the dryer program
– Starting the dryer program
– Advancing the dryer program
– Interaction on failure messages
 INITIALISATION MENU:
– Setting the program processes
– Setting the program prices
– Shows the software version
 CONFIGURATION MENU:
– Selection of the machine type
– Selection of the coin values
– Overview of the 8 last occured diagnostic messages
– Starting a diagnostic program
– Selection of the communication link