Specifications

516307 C PUBLICATION DATE 31 JAN 2008.DOC PROGRAMMING MANUAL 25
„E“ ERROR LIST SUBMENU
The goal of the Error List Submenu is to memorise diagnostic messages that have occurred at the drying
process in case of functional failures.
There are up to 8 messages kept in memory.
The last occurred failure message will be displayed as the first one.
ERROR 1
- Failure message 1 is the last failure message that has occured.
- You can check the corresponding failure messages for Er1 upto Er8.
ERROR CLEAR
- You can erase the list with error numbers by selecting „cLr“=on.
- When all the messages are cleared: There will be eight times a „0“.
- Value „0“ means that no Err message has occured.
oFF = the error messages are not erased
on = the error messages are erased
„H“- DIAGNOSTIC – TEST PROGRAM SUBMENU
The diagnostic program is a tool to evaluate the good functionality of the dryer.
- Select the diagnostic program.
- Press the start button to start the diagnostic program.
- Go to chapter 8 to find an overview concerning the diagnostic help program test sequence.
oFF = the diagnostic program is not selected
on = the diagnostic program is selected