Specifications

516307 C PUBLICATION DATE 31 JAN 2008.DOC PROGRAMMING MANUAL 23
In the case of Error message 35: To install the dryer Installation/Configuration properly, you have to reset
the factory setting in the configuration menu.
Error message 35 can only be erased by switching off and on the power.
HEATING TYPE
- Select the correct heating type from the list.
• Elc : Electrical Heating
• GAS : Gas Heating
• StM : Steam Heating
Default: Gas Heating
TEMPERATURE SENSOR 2
- Preset value for temperature Sensor 2.
- This is the max allowed value for the heated air at the heating system.
- Adjustable between 0 and 250 °C. If value = 0°C, sensor is switched off.
Default : according to the machine type 150 - 200°C
When the air temperature at the heating system exceeds value „t2“ then the heating is switched off
until the heated air temperature drops below „t2“.