Specifications

20 PROGRAMMING MANUAL 516307 C PUBLICATION DATE 31 JAN 2008.DOC
oFF = without humidity sensor
on = with humidity sensor
Default: without humidity sensor
REMARK
HUMIDITY CONTROL IS ONLY APPLICABLE FOR OPL DRYERS AND DRYERS WITH EXTERAL
PAYMENT SYSTEM.
IT IS NOT APPLICABLE FOR COIN OPERATED DRYERS.
SPECIAL PRICES
- Only for COIN machines connected with a Special Price time Signal.
If the special price input signal is low, the standard Normal „Reference Time Settings“ will be
displayed at Start-up. See c-submenu, menu items : rt1, 2, 3.
If the special price input signal is high, the Special „Reference Time Settings“ will be
displayed at Start-up. See c-submenu, menu items : St1, 2, 3.
oFF = no special prices can be programmed in the c-menu.
on = special prices can be programmed in the c-menu
Default: without special prices selection
ATTENTION !!!
ONLY ONE COIN SWITCH CAN BE USED IN CASE OF SELECTION „SP = ON“ AS THE SECOND
INPUT SIGNAL IS USED FOR THE SPECIAL PRICE SELECTION.
EXTERNAL PAYMENT SYSTEM
In case of EXTERNAL PAYMENT system, „RL2“ is best selection as it is the most flexible solution.
- When the dryer computer is connected to an External Payment system, the selection EP
must be set to REL or RL2. (RL3 is a customer specific solution.)
- The Start Button light will start flashing when the dryer program price has been paid at the
central payment unit.
(Start Release Input Signal = High)
- By pressing the Start button, the program is started.
- Busy Signal:
As a busy signal for the drying process, the state of the contactor that controls the
Ventilator is applicable.
- Selection REL : * Dryer computer accepts only one pulse from central payment system.
* This pulse works as Start Release.
* Always temperature Button must be pressed before cycle can be started.
* Setup values from „P“ menu are applicable.
* Program can NOT be changed after start.