Specifications

516307 C PUBLICATION DATE 31 JAN 2008.DOC PROGRAMMING MANUAL 19
LINT CYCLE COUNTER
- You can set the cycle counter value for which the Dryer gives a warning that the Lint Filter must be
cleaned.
- The value can be set between 0 and 40 cycles.
Default: 0 cycles
- Depending the kind of linen, the lint filter has to be cleaned more or less frequently.
- The warning helps you to remember that the filter has to be cleaned.
- For the default value „0“ cycles, the function is switched off and no message to clean the lint filter
will be shown on the display.
- LCC value is reset to „0“ when switching „cn=off“ to „cn=on“ and vice versa.
ATTENTION !!!
FOR SAFETY AND PERFORMANCE PURPOSES, IT’S STRONGLY RECOMMENDED TO CLEAN THE
LINT FILTER AFTER EACH DRY CYCLE.
TEXT ON DISPLAY
- The texts on the display are abreviations to inform the operator about the action he should take.
- In some countries English is not accepted, so it is possible to switch off the texts.
oFF = without text on display
on = with text on display
Default: with text on display
ADVANCE THE DRY CYCLE
ONLY FOR OPL MACHINE
- You can advance (skip) an active program step by step by pressing the start button.
oFF = no ADV function
on = ADV function
Default: with ADV function
HUMIDITY SENSOR
HUMIDITY SENSOR IS OPTIONAL FOR EC DRYERS.
- If the machine is executed with a humidity sensor than „Hum“ must be set On.