Specifications

14 PROGRAMMING MANUAL 516307 C PUBLICATION DATE 31 JAN 2008.DOC
is opened. Before a new cycle can be started the door must be opened and closed.
Pay : At the end of the drying cycle „Pay“ is shown immediately, a new cycle can be started without
opening the door.
co1 : At the end of the drying cycle the value of coin drop 1 is displayed, a new cycle can be started
without opening the door.
This information instructs customers which coin is needed for payment.
Default : End = Nul
Price
There are 2 ways to setup the price for the 3 dryer programs: One Price & Individual Price.
Selection list : OnE, Ind
One : There is only 1 price (-time) reference (also only 1 cooldown time value)
Ind : (Individual) There are 3 price (-time) references (and also 3 cooldown values)
Default : PrI = one
Decimal Point reference Time
dPt sets the Decimal Point for „rt“ Reference Time smallest coin value.
The decimal point setup is only required in case an electronic coin selector is applicable.
The electronic coin selector works with a pulse train.
For each pulse from the electronic coin selector a small time value is added to the total drying time
showed on display.
Default : dPt = 00.0
Reference Time smallest coin value
When a coin is inserted in the coinselector and accepted by the dryer computer, the dryer computer
will increase the total process time to dry the linen.
In case of 2 mechanical or 1 electronic coinselector you can pay with 2 or more different coins.
Example 0,5 EUR, 1 EUR.
For the smallest coin value the increased drying process time has to be smaller than for the biggest
coin value.
To make the programming easy, a reference time value must be set for the smallest coin value.
Then the dryer computer will automatically calculate the drying process time corresponding with the
biggest coin value. This is simply done automatically by the computer by taking the same ratio like
for the smallest and biggest coin value.
One Price :
rt : Reference Time corresponding with coin value 1
Defaults : rt = 5 Min