Specifications

516307 C PUBLICATION DATE 31 JAN 2008.DOC PROGRAMMING MANUAL 13
„C“- PRICE SUBMENU
ONLY FOR MACHINES WITH A COIN SELECTOR & EXTERNAL PAYMENT SYSTEM.
The Price Sub-Menu contains the time settings in relation to the coin values.
Minimum Time to Start Dryer
To ensure that the dryer will always be started for a minimum amount of time, there is a „Minimum
Time value to Start the Dryer“.
If the value for „MtS“ is bigger than any coin reference time „rt“ value, the customer has to pay
with more than one coin to start the dryer.
The MtS time value can be set between 0 and 99 minutes.
Default : 1 minute
Reset Program
At the end of the drying cycle you can set if the last selected drying cycle must be „reset“, keep the
„old selection“ or jump automatically to the „Low“ or „Medium“ Temperature selection.
The main difference is that in one case („Yes“) you can not START the dryer without selecting first
a program. In the other 3 cases the dryer computer is automatically suggesting a program.
Selection list : no, Yes, lo, med
no : The Program selection is not reset. (The program button LED of the finished drying cycle stays on)
Yes : The Program selection is reset. (All 3 program button LED's are off)
lo : The Program selection „Low Temperature“ is automatically selected. (The Low Temperature
program button LED is switched on)
med : The Program selection „Medium Temperature“ is automatically selected. (The Medium
Temperature program button LED is switched on)
Default : rPr = Yes
Program End
There can be shown differend information at the end of the drying cycle.
Selection list : nul, Pay, co1
nul : When the time at the end of the drying cycle is „0“ minutes, value „0“ is displayed until the door