Specifications

516307 C PUBLICATION DATE 31 JAN 2008.DOC PROGRAMMING MANUAL 11
 UNWRINKLE CONTROL FUNCTION
The Unwrinkle function avoids that the linen gets wrinkled at the end of the dry cycle when the
operator has no time to Unload the machine immediately.
The unwrinkle time is the time that the machine will still revers the fabrics at a 99% reduced
mechanical action, once the drying process is finished.
Unwrinkle Time
The purpose of this menu-item is to set the Unwrinkle Sequence time.
The function is switched OFF for a time setting = 0 minutes.
The unwrinkle time can be set between 0 – 180 minutes.
Default : 0 minutes
The buzzer will function each time the mechanical action is restarted to warn the operator that the
drying cycle has terminated.
Unwrinkle On Time
The time when the drum rotates at the Unwrinkle sequence.
The Unwrinkle On Time can be set between 3 – 99 seconds.
Default : 5 seconds
Unwrinkle Off Time
The time when the drum doesn’t rotate, at the Unwrinkle sequence.
The Unwrinkle Off Time can be set between 1 – 15 minutes.
Default : 5 minutes
 REVERSATION CONTROL FUNCTION
The „Reversation“ Function is optional and only valid when the dryer is executed with a separate
ventilator and drum motor. It means that at a drying sequence the drum is turning and stopped in
intervals that can be set by the „Reversation“ „On“ and „Off“ Times.
The Menu items „ron“ and „rof“ are only accessible when the setting „rev“ is switched „on“ in the „t“-
menu.