Product Manual A

AIR 40, AIR Breeze, AIR 30, AIR MaX, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc. AIR Owner’s Manual 3-CMLT-2020 REV-A / 2-26-2021 50
APPENDIX B (connued)
SILENT X and AIR MaX BLADE KIT COMPONENTS
ROTOR BLADES
Check if the blades show damages (e .g. broken edges, damaged
surface or cracks). you noce any damage, the generator must
not be used any longer. Check blade bolt ghtness one day
aer mounng and aer that every 3-6 months. Eventually then
can go to a longer
ADVANCED HUB DESING AND HARDWARE / NOSE CONE
A new advanced hub design allows for the blades to be slipped into the hub with very lile
movement. This new hub eliminates the need to any p to p measurements of the blade.
Included with each blade set is a washer for behind hub and rotor sha. This washer is an
oponal install and only should be used if there is rubbing from hub to AIR turbine Face that
impedes free movement of rotor hub. Most AIR installs will not require this washer. NOTE:
In addion to the washer you will nd Tef-Gel and applicator in your hardware kits. Tef-Gel
should be applied to all bolts prior to installaon to prevent corrosion and lubricate threads
for proper t. Applicable to both land and marine AIR units.
Fig. 1 Blade Set (set of (3))
Fig. 2 Hub and Hardware
Fig. 3 Nose Cone (white)
NOTE: The Silent X Blade Kit (Upgrade Kit) can be retroed to all Primus
Wind Power wind turbine models. For further informaon contact Primus
Wind Power directly.