Product Manual A

AIR 40, AIR Breeze, AIR 30, AIR MaX, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc. AIR Owner’s Manual 3-CMLT-2020 REV-A / 2-26-21 16
AIR WIND TURBINE TOWERS
1. The AIR wind turbine mounts on tubing with a nominal 1.875 – 1.900
inch outside diameter.
2. Typical tower construcon use: 1 1/2 inch Schedule 40 steel pipe or 2 inch
SS-20 galvanized fence tubing (0.090 inch wall thickness) or equivalent.
3. DO NOT use plasc pipe to construct a tower or electrical conduit.
LAND TOWER OPTIONS
Primus Wind Power oers a number of tower choices for your AIR wind turbine.
The following secon provides a summary of the available tower kits. User manuals
for the towers and tower kits are available online and you are encouraged to review
them in order to make the most informed tower selecon.
27  (8.3 m) Tower Kit
The 27  (8.3 m) Tower Kit includes a tower clamp/guy wire assembly and all neces-
sary hardware and fasteners to erect a 27  lt-up tower using Schedule 40 steel pipe
or tubing with an outside diameter of 1.875 inch. See Fig. 3.
Note: Anchors and tubing are not furnished with the kit.
29  (8.8 m) EZ – Tower
The 29  (8.8 m) EZ Tower is a complete kit that includes all materials required to as-
semble a 29  guy wire lt-up tower. Anchors, guy wire assemblies, galvanized steel
tubing and all fasteners. See Fig. 4.
Fig. 4. 29  (8.8 m) Tower Kit
IMPORTANT: User manuals for towers and tower kits are available
online at www.primuswindpower.com. Primus Wind Power recommends
reviewing them to make an appropriate tower selecon for your AIR
wind turbine.