Product Manual A

AIR

Owner’s Manual 15

Step 2: Mount Blade Hub to Turbine

TURBINE ASSEMBLY

Step 3: Attach Nose Cone

Assembled

blade hub

Rotor

shaft

1.) Coat rotor shaft threads and blade hub with Tef Gel.

2.) Slide blade hub onto rotor shaft.

1.) Start 5/8-18 jam nut on rotor shaft.

2.) Carefully and slowly “spin” the blades to begin tightening the nut.

IMPORTANT: Tef-Gel is a corrosion inhibitor and

is especially important in marine applications.

5/8-18

Jam nut

Blade

hub

Blade

hub

Jam nut

Rotor

shaft

5/16” Hex

wrench

1.) Insert 5/16” hex wrench in rotor shaft.

2.) Carefully and slowly “spin” the blades to completely secure the

blade hub to the turbine.

1.) Attach nose cone to blade hub. You will feel it snap into place.

2.) Tug on nose cone to ensure it is secure.

WARNING: Don’t attempt to mount the turbine while

blades are spinning.

Nose

cone