Product Manual A

AIR 40, AIR Breeze, AIR 30, AIR MaX, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc. AIR Owner’s Manual 3-CMLT-2020 REV-A / 2-26-21 12
Blade to Hub Assembly (STEP 1)
3/16”
Assembled blade
NOTE: See Appendix B: AIR Silent X and AIR maX Blade Set and Further Installaon Recommendaons.
Assembly blade set rst using proper torque for hardware and applicaon of tef-gel
included.
AIR 30 and AIR X Marine units, it is recommended to perform p to p measurment of
blades prior to properly securing hub to avoid vibraon. The hub blade root allows for
adjustment of the blade posion. Therefore, it is recommended to adjust the distance
between each blade p. The blades should have a distance from blade p to blade p
approximately equal between all three blades.
and AIR X Marine
IMPORTANT: Tef-Gel is a corrosion inhibitor and is especially im-
portant in marine applicaons. Tef-Gel should be applied to all blade
bolts and yaw bolts using the applicator and Tef-Gel provided with your
hardware kit. Tef-Gel helps to prevent corrosion and lubricates threads
(recommended for both land and marine usage). Tef-Gel has been ap-
plied to the top of yaw bolt threads upon pre-assembly of the yaw at the
factory.
WARNING: Nylock nuts and greased blade bolts may only be used one me;
replace aer each use.