Primus Wind Control Panel Specifications

Wind Control Panel
Primus Wind Power is pleased to offer a low cost analog wind control panel for use with AIR Breeze, AIR 40
12/24/48 V and AIR X Marine/AIR 30 /Silent X - 12 VDC wind turbines. The panel is easy to install and will
result in a professional operator station enhancing the beauty and value of your vessel or home installation.
The WCP will help to reduce installation cost and with just 4 wires to connect, makes installation a snap. There
are multiple versions of this WCP for the various wind turbine models and voltages. See price list for model
needed and specification of breaker and amp meter size.
The WCP controls and monitors the wind turbine. It is equipped with a power
On/Off circuit breaker, analog ammeter (indicating wind turbine current
production) and a Stop/Run switch (for direct control of the turbine). A clearly
marked rear terminal block is provided for easy interconnect of the two
turbine wires and two battery power wires. Panel is fully calibrated and ready
for installation.
Wind Control Panel Enclosure also available.
WIND
CONTROL
PANEL
BATTERY
BANK
WIND CONTROL PANEL WIRING DIAGRAM