Primus Wind Power AIR 45' Tower Manual

PRIMUS WIND POWER DOCUMENT #0070 REV C
PRIMUS WIND POWER Page 26 of 26
2/4/05
4) Assemble the snap links, rope and 8 foot cable as they were when the tower was raised.
5) Disconnect the guy wires on the gin pole side only.
6) Position a box where the tower is expected to come to the ground to protect the turbine
blades from damage.
7) With the tower raising / lowering rope in one hand, push at the base of the tower until the
tower starts to tip and the rope/gin pole is holding the tower.
8) Gently feed rope through the snap links to lower the tower.