User manual

Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will automatically select the maximum spin
value provided for the programme you have
chosen. You can change this value by
pressing the corresponding button. The
green pilot light of the button 4 starts to
flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
«O» to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position O, to
switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 4 will blink 3 times
to indicate a wrong selection. The
machine will not perform the new
selected programme.
Reduce the spin speed by pressing
button 2
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 2 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant light
illuminates.
Select the available options by
pressing buttons 2 and 3
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the pro-
gramme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they
are pressed again, the pilot lights go out. If
an incorrect option is selected, the integra-
ted red pilot light of the button 4 flashes for
3 times.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
Rinse hold
By selecting this function the water of the
last rinse is not emptied out to prevent the
fabrics from creasing. Before opening the
door it will be necessary to empty out the
water. To empty out the water, please read
the paragraph «At the end of the pro-
gramme».
Prewash
By selecting this option the machine per-
forms a prewash cycle before the main
wash phase. The washing time will be pro-
longed. This option is recommended for
heavily soiled laundry.
Super Quick
Short cycle for lightly soiled items or for
laundry which needs only freshening up.
We recommend you to reduce the fabrics
loading.
Start the programme by pressing
button 4
To start the selected programme, press the
button 4, the corresponding green pilot light
stops blinking. The pilot light corresponding
to the running phase illuminates. The appli-
ance starts operating and the door is
locked.
To interrupt a programme which is running,
press the button 4: the corresponding
green pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 4
7